Erhardt-leimer Do 3001 Manual -

If your DO 3001 is equipped with an optional air-purge connection, ensure the compressed air supply is completely dry and oil-free (Class 1 filtration). 6. Troubleshooting and Error Codes Symptom / Error Code Potential Cause Recommended Action Status LED Flashing Red Severe lens contamination or hardware failure. Clean the lens. Restart power. Recalibrate. Unstable Web Guiding Improper calibration or high mechanical vibration. Re-run the 0% and 100% calibration steps. Tighten mounts. No Signal Output (0 V) Lost communication or power interruption. Verify 24V supply on Pin 1. Check CAN bus continuity. Sensor Over-range Web is completely out of the physical measuring window.

🛠️ Erhardt+Leimer DO 3001: Digital Control Command Station

Designed for versatile installation, including panel mounting in industrial cabinets.

In the world of industrial web processing—printing, coating, laminating, nonwovens, paper, film, foil, and textiles—precise lateral web alignment is non-negotiable. Erhardt+Leimer (E+L) has long been a benchmark name in web guiding systems. Among their legacy and transitionary control units, the represents a specific generation of digital/web guide controllers that bridged purely analog systems and fully networked, HMI-driven modern platforms. This essay explores the typical purpose, operational logic, interface, and practical use of the DO 3001 as would be described in its original manual. Erhardt-leimer Do 3001 Manual

: Users can offset the web position manually using specific adjustment keys while in automatic mode.

: It facilitates the positioning of a moving web according to its edge, preventing it from wandering off to the side during high-speed manufacturing.

What are you guiding? (e.g., clear plastic, paper, foil) What error code or LED color sequence are you seeing? If your DO 3001 is equipped with an

: Configuring the unique device addresses via DIP switches if the unit is added to an existing network. Calibration

| Parameter | Value | |-------------------------|-------------------------------------------------------------------| | | 24 V DC (nominal range 20–30 V DC) | | Current consumption | AG 91: 6 A AG 93: 8 A | | Ambient temperature | 0 … 50 °C | | Protection class | IP 54 | | Dimensions | Housing 135.5 × 135.5 × 100 mm Panel cut‑out 124 × 124 mm | | Weight | approx. 0.6 kg | | Sensor connections | 2× edge sensors (MB SensorCAN) 1× line sensor | | Interface to actuator | Ethernet (1 ms response) and power supply | | Interface to customer | 12 digital inputs, 2 digital outputs |

If the web moves left when it should move right, the motor polarity needs reversing. Clean the lens

However, I can provide you with a that describes the device, its typical functions, applications, and common sections found in such a manual, based on publicly available technical data, industry knowledge, and E+L product series patterns.

: Built with high-quality materials to maintain consistent performance in demanding industrial environments. Technical Specifications Application Compatibility

: Ensure the controller chassis shares a common electrical potential with the main machine frame to prevent electromagnetic interference (EMI). Operating Modes & Navigation

Confirms menu selections and saves adjusted setpoints to the internal EEPROM memory.

The is a specialized digital control command station designed for high-precision web guiding systems . As an essential component in industrial automation, it functions as a human-machine interface (HMI) that allows operators to monitor and correct the position of moving material webs in real-time. Key Features and Functions