Toggle between manual arming or automatic 30-second passive arming modes. 🔋 Battery Replacement Guide
Whether you have the or a PIN code card . The make and model year of the vehicle it is installed in.
If you are transporting the bike (e.g., on a trailer) and want to keep the alarm active without the tilt sensor, press Button 1 twice Gemel Txshs User Manual
| | Button to Press | How Many Times | Typical Response | | :--- | :--- | :--- | :--- | | 🔒 Central Locking / Arm Alarm | Button A | Once | Hazard lights flash twice (no sound) | | ⚠️ Secondary Arm (Immobilizer) | Button A | Twice quickly | 3 beeps + 3 indicator flashes | | 🔓 Unlock / Disarm Alarm | Button B | Once | Hazard lights flash once (no sound) |
Charge your primary 12V motorcycle battery; low main voltage tricks the Gemel system into thinking it is being tampered with. Dead internal backup batteries within the central module. Toggle between manual arming or automatic 30-second passive
If you need to lock the vehicle but leave it in a situation where it might move (e.g., on a ferry), press the Left Button twice . The indicators will flash three times, accompanied by three beeps, indicating the motion sensor is bypassed. Disarming/Turning Off the Alarm
: Press Button 1 once. The direction indicators will flash twice. If you are transporting the bike (e
The system is now fully armed with both the ignition kill switch protection and the motion/vibration sensors fully active. 2. Arming Without the Motion Sensor (Garage Mode)
If your motorcycle stops responding to the key fob, or if you are introducing a replacement Gemel TXSHS remote, you must execute the manual synchronization process.
The Gemel TXSHS uses a two-button layout with multi-click functionality to control different security layers.
© 2023 Gemel Industries. All rights reserved. Specifications subject to change without notice.