Hp Probook 450 G0 Disassembly ◉ (VERIFIED)

The keyboard is tricky—it’s held by hidden clips under the top bezel.

Do you need help troubleshooting a question for an upgrade?

For cleaning old thermal paste.

: Clean the dried, crusty factory thermal paste off the CPU die and the copper heatsink pad using isopropyl alcohol. Apply a small, pea-sized drop of fresh high-performance thermal compound to the center of the processor chip before reinstalling the heatsink.

Optional: To repaste the CPU, remove the four screws on the heat sink in the order marked (1-2-3-4). Removing the keyboard requires removing the top cover. hp probook 450 g0 disassembly

Flip the laptop over and open the lid. Use a plastic pry tool to gently lift the top edge of the keyboard (near the Function keys) and pull it toward the screen.

Lift the door away to expose the primary upgradeable components. Step 2: Upgrading RAM and Storage (CRUs) The keyboard is tricky—it’s held by hidden clips

Use a plastic prying tool to carefully unclip the keyboard top bezel (the plastic piece just above the keyboard).

For a step-by-step visual demonstration of opening the service door and upgrading internals, watch this guide: : Clean the dried, crusty factory thermal paste

Gently pry upward to release the plastic clips holding the keyboard down. Work your way carefully from left to right.