Plug the male end of the power cord into an active electrical wall outlet.
If you want to optimize your setup for specific platforms, please let me know:
: Insert the USB cable into the back of the printer and connect the other end to an available USB port on your computer.
Before printing live merchant documents, confirm that your computer communications are functioning accurately. Open the Windows menu. Click on Xprinter XP-D4601B and open Printer Properties . Click the Print Test Page button on the General tab. instal xprinter xp-d4601b
thermal label printer , you must physically connect the hardware, install the specialized device drivers, and calibrate the software paper size properties. The Go to product viewer dialog for this item.
Place your roll of thermal label paper (or continuous paper) onto the paper spindle.
If the printer spits out blank labels or won't stop feeding, the gap sensor needs to be re-calibrated. Repeat Step 2 (the hardware self-test). Plug the male end of the power cord
Adjust the paper guides so they sit snugly against the edges of the paper (without bending it). This ensures the paper feeds perfectly straight. Close the cover until it clicks.
Watch the LED light cycle through colors. When it blinks red/amber or flashes repeatedly, release the FEED button.
using the power switch on the side to ensure the LED indicator lights up. Step 2: Load the Label Rolls Open the Windows menu
The installation wizard should automatically detect the plug-and-play USB hardware asset. Select from the printer model list.
The most common issue users face with thermal label printers is formatting. Because labels vary greatly in size (e.g., 10 × 15 cm for shipping labels), you must configure your Windows or Mac settings to match your specific label dimensions.
Configure your print settings to match the physical dimensions of the labels you are using. The standard shipping label size is 4x6 inches.
Select and click Manage > Printing Preferences .
After calibration, you must configure the label size in your system's printer settings.