Because the MS-7613 Ver 1.1 is an OEM motherboard custom-built for Hewlett-Packard, You must source the files through HP support or archived repositories. Sourcing via HP Support
: Restart your PC and repeatedly tap the F10 or Esc key (standard for HP/Compaq systems using the MS-7613) to enter the BIOS Setup. Flash the Firmware :
After your PC restarts, enter the BIOS setup again (using the F10 key) to verify that the version has been updated to 6.18. ms 7613 ver 1.1 bios update
The HP utility will extract the files and open a flashing window.
Legacy BIOS versions often freeze or fail to POST (Power-On Self-Test) when a modern UEFI-only graphics card (like the GTX 10-series or RX 500-series and newer) is installed. A BIOS update adds necessary legacy/UEFI boot adjustments. Because the MS-7613 Ver 1
If you own a system with this board, you may be looking for a BIOS update for several reasons:
The most common reason users update this board is to fix the "black screen on boot" or "stuck at HP logo" error when installing modern GPUs (like the GTX 750 Ti, GTX 1050, or RX 460/560). Later BIOS versions fix legacy Option ROM/UEFI handshake issues. The HP utility will extract the files and
Navigate to the Exit menu and select (or Load Optimized Defaults ). This clears out old data parameters that might cause conflicts. Save changes and exit.
If you are upgrading the CPU for better performance (e.g., adding a Xeon E3-1275 or i7-870), you may not need a BIOS update if the processor is within the motherboard’s supported list.
Fixes minor ACPI bugs when running Windows 10 or Linux distributions.
placeholder