| Material | Nozzle Temp (Manual) | Actual Best Temp | Bed Temp | Enclosure | | :--- | :--- | :--- | :--- | :--- | | | 190-210°C | 205°C | 50°C | Door Open | | ABS | 230-240°C | 245°C | 100°C | Door Closed | | PETG | 220-235°C | 230°C | 70°C | Door Half Open | | Nylon | 250-260°C | 255°C | 100°C | Door Closed + Vent |
Once the nozzle reaches its target temperature, press down on the silver spring-loaded lever on top of the extruder.
features a user-friendly touch screen. The interface is intuitive, offering easy access to:
Check the tension of your X and Y axis belts. They should be taut like a guitar string. Inspect the grub screws on the stepper motor pulleys to ensure they are tight. If youPlease let me know: What material you are currently trying to print with? What slicing software you prefer to use? qidi x-pro manual
which features fully automatic leveling, the X-Pro requires significant hands-on effort. Assisted Leveling:
Need the official QIDI X-Pro manual? This complete guide covers setup, dual extrusion, UI navigation, troubleshooting, and download links for the latest PDF. Master your 3D printer today.
Proper bed leveling is the single most important factor for successful 3D prints. The QIDI X-Pro uses a manual 3-point leveling system via the touchscreen interface. Step-by-Step Leveling | Material | Nozzle Temp (Manual) | Actual
| Command | Function | |---------|----------| | G28 | Home all axes | | G29 | Auto-bed leveling (if enabled) | | M104 S205 | Set extruder 1 temp to 205°C | | M140 S60 | Set bed temp to 60°C | | M141 S45 | Set chamber temp to 45°C | | T0 / T1 | Switch to extruder 0 (left) or 1 (right) |
Remove the foam packaging. Do not throw away the foam blocks—you will need them if you ever ship the printer for service. Manually rotate the Z-axis lead screws. They should turn smoothly. If you feel grinding, there is shipping debris in the nut.
Periodically use a brass wire brush to clean outer residue from the nozzles while they are heated. Run a "cold pull" if you suspect partial internal clogs. They should be taut like a guitar string
The X-Pro utilizes (based on Cura), though it is also fully compatible with Simplify3D.
The Qidi X-Pro manual provides an in-depth look at the various print settings and their effects on print quality:
